Sentry Industries PT40 User Manual download pdf (Page 18)

Telnet/SSH

The Telnet/SSH configuration page used to enable or disable Telnet and SSH support and configure the

port number that the Telnet or SSH server watches. For more information on SSH see page 43 in

Chapter 4: Advanced Operations.

Enabling or disabling Telnet or SSH support:

Select Enabled or Disabled from the appropriate Server drop-down menu and press Apply.

Changing the Telnet or SSH server port number:

In the appropriate Port field, enter the port number and press Apply.

HTTP/SSL

The HTTP/SSL configuration page used to enable or disable HTTP and SSL support, configure the port

number that the HTTP server watches and responds to, selection of the method of authentication used

and SSL access level. For more information on SSL see page 42 in Chapter 4: Advanced Operations.

Enabling or disabling HTTP or SSL support:

Select Enabled or Disabled from the appropriate Server drop-down menu and press Apply.

Changing the HTTP server port number:

In the HTTP Port field, enter the port number and press Apply.

Setting the HTTP authentication method:

The Sentry HTTP server supports two authentication methods for security and validation of the

username-password – Basic and MD5 digest.

The Basic method utilizes Base64 encoding to encode and deliver the username-password over the

network to the HTTP server for decoding and authentication. This basic method is supported by all

web browsers and offers a minimum level of security.

NOTE: The Base64 algorithm is widely-known and susceptible to packet-sniffer attack for acquisition of the encoded

username-password string.

The MD5 digest method provides stronger protection utilizing one-way encoded hash numbers, never

placing the username-password on the network. Instead, the sending browser creates a challenge code

based on the hash algorithm, provided username-password and unique items such as the device IP

address and timestamp, which is compared against the HTTP server internal user database of valid

challenge codes. The MD5 digest method offers a higher level of security than the Basic method but at

present is not supported by all browsers.

NOTE: MD5 is known to be fully supported by Internet Explorer 5.0+

Select Basic or MD5 from the Authentication drop-down menu and press Apply.

Setting SSL access level

Sentry SSL supports configuration of SSL connections as being either optional or required. The default

access level is set to optional.

• Optional –Both non-secure (HTTP) and SSL encrypted connections (HTTPS) are allowed access.

• Required – ONLY SSL encrypted connections (HTTPS) are allowed access.

Select Optional or Required from the Secure Access drop-down menu and press Apply.

14 • Operations Sentry Commander - PT40

Installation and Operations Manual

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 63 64

No comments

Sentry Industries PT40 User Manual Page 18